Fabrication and Characterization of Syringe Carbon Paste Electrode for Electrochemical Measurement

Authors

  • Anom Cahyotomo Program Studi DIII Analisis Kimia, Politeknik AKA Bogor, Bogor, Indonesia
  • Mohammad Jihad Madiabu Program Studi DIII Analisis Kimia, Politeknik AKA Bogor, Bogor, Indonesia
  • Arie Pratama Putra Program Studi DIII Analisis Kimia, Politeknik AKA Bogor, Bogor, Indonesia
  • Ardina Purnama Tirta Program Studi DIII Analisis Kimia, Politeknik AKA Bogor, Bogor, Indonesia
  • Imas Solihat Program Studi DIV Nanoteknologi Pangan, Politeknik AKA Bogor, Bogor, Indonesia
  • Dicky Annas Pusat Riset Kimia, Badan Riset dan Inovasi Nasional, B.J. Habibie Science and Technology, Tangerang Selatan, Indonesia

DOI:

https://doi.org/10.33751/helium.v4i2.5

Keywords:

characterization, cyclic voltammetry, K3Fe(CN)6, syringe carbon paste electrode

Abstract

This study aims to fabricate and characterize a syringe carbon paste electrode (SCPE) using K3Fe(CN)6 10 mM solution with cyclic voltammetry technique. Characterization is performed by varying pH (pH 4, 7, and 10) and scan rate (30 - 100 mV/s) so that the characteristics of SCPE can be observed. The K3Fe(CN)6 10 mM solution test results at various pH variations obtained the largest anodic peak current (Ipa) at pH 10 was 44.75 µA. The scan rate results at various pH showed linear results with the diffusion coefficient of 1.77 x 10-6 cm2/s, 1.65 x 10-6 cm2/s, and 2.50 x 10-6 cm2/s with r values of 0.9994, 0.9975, and 0.9992 for pH 4, pH 7, and pH 10 respectively. This indicated that a diffusion process controlled this system's mass transfer in various pH. The detection of nitrite ions at a concentration of 2 mM showed a clear oxidation peak, with the highest Ipa value of 61.28 µA in pH 7 buffer solution.

References

J. Wang, Electrochemical detection for microscale analytical systems: a review, 2002. www.elsevier.com/locate/talanta.

P. Fanjul-Bolado, D. Hernández-Santos, P.J. Lamas-Ardisana, A. Martín-Pernía, A. Costa-García, Electrochemical characterization of screen-printed and conventional carbon paste electrodes, Electrochim Acta 53 (2008) 3635–3642. https://doi.org/10.1016/j.electacta.2007.12.044.

J. Tashkhourian, B. Hemmateenejad, H. Beigizadeh, M. Hosseini-Sarvari, Z. Razmi, ZnO nanoparticles and multiwalled carbon nanotubes modified carbon paste electrode for determination of naproxen using electrochemical techniques, Journal of Electroanalytical Chemistry 714–715 (2014) 103–108. https://doi.org/10.1016/j.jelechem.2013.12.026.

I. Svancara, K. Vytras, J. Barek, J. Zima, Carbon paste electrodes in modern electroanalysis, Crit Rev Anal Chem 31 (2001) 311–345. https://doi.org/10.1080/20014091076785.

Y. Li, J. Liu, Y. Zhang, M. Gu, D. Wang, Y. yan Dang, B.C. Ye, Y. Li, A robust electrochemical sensing platform using carbon paste electrode modified with molecularly imprinted microsphere and its application on methyl parathion detection, Biosens Bioelectron 106 (2018) 71–77. https://doi.org/10.1016/j.bios.2018.01.057.

J. Muñoz, F. Leonardi, T. Özmen, M. Riba-Moliner, A. González-Campo, M. Mas-Torrent, M. Baeza, M. Mas-Torrent, Carbon-paste nanocomposites as unconventional gate electrodes for electrolyte-gated organic field-effect transistors: Electrical modulation and bio-sensing, J Mater Chem C Mater 7 (2019) 14993–14998. https://doi.org/10.1039/c9tc04929k.

A. Moutcine, C. Laghlimi, Y. Ziat, M.A. Smaini, S.E. El Qouatli, M. Hammi, A. Chtaini, Preparation, characterization and simultaneous electrochemical detection toward Cd (II) and Hg(II) of a phosphate/zinc oxide modified carbon paste electrode, Inorg Chem Commun 116 (2020). https://doi.org/10.1016/j.inoche.2020.107911.

K. Prabhu, S.J. Malode, N.P. Shetti, Highly sensitive electrochemical sensor for the detection and quantification of Linuron based on silica gel modified carbon paste electrode, Environ Technol Innov 23 (2021) 101687. https://doi.org/10.1016/j.eti.2021.101687.

K.G. Manjunatha, B.E.K. Swamy, H.D. Madhuchandra, K.J. Gururaj, K.A. Vishnumurthy, Synthesis and characterization of MgO nanoparticle and their surfactant modified carbon paste electrode sensing for paracetamol, Sensors International 2 (2021). https://doi.org/10.1016/j.sintl.2021.100127.

A. Yari, A. Shams, Fabrication of a renewable syringe carbon paste electrode with a motor rotary blade and using for voltammetric measurement of dipyridamole, Journal of the Iranian Chemical Society 15 (2018) 1861–1869. https://doi.org/10.1007/s13738-018-1383-2.

W. Belbacha, F. Naamoune, H. Bezzi, N. Hellal, L. Zerroual, K. Abdelkarim, B. brahim, M. Fernandez Garcia, D. López, Elaboration of carbon paste electrode containing pentadentate Nickel-(II) Schiff base complex: Application to electrochemical oxidation of thiosulfate in alkaline medium, Arabian Journal of Chemistry 13 (2020) 6072–6083. https://doi.org/10.1016/j.arabjc.2020.05.007.

A.B. Teradale, S.D. Lamani, P.S. Ganesh, B.E. Kumara Swamy, S.N. Das, CTAB immobilized carbon paste electrode for the determination of mesalazine: A cyclic voltammetric method, Sens Biosensing Res 15 (2017) 53–59. https://doi.org/10.1016/j.sbsr.2017.08.001.

M. Stoytcheva, R. Zlatev, Z. Velkova, V. Gochev, B. Valdez, G. Kirova, Y. Hristova, Improving the Analytical Performances of the Ibuprofen Voltammetric Determination at Bare Graphite Electrode Using Semi-Derivative Linear Sweep Voltammetry, Int J Electrochem Sci 17 (2022). https://doi.org/10.20964/2022.06.61.

M. HARSINI, B.A. WIDYANINGRUM, E. FITRIANY, D.R.A. PARAMITA, A.N. FARIDA, A. BAKTIR, F. KURNIAWAN, S.C.W. SAKTI, Electrochemical synthesis of polymelamine/gold nanoparticle modified carbon paste electrode as voltammetric sensor of dopamine, Chinese Journal of Analytical Chemistry 50 (2022) 100052. https://doi.org/10.1016/j.cjac.2022.100052.

G. Yildiz, N. Oztekin, A. Orbay, F. Senkal, Voltammetric determination of nitrite in meat products using polyvinylimidazole modified carbon paste electrode, Food Chem 152 (2014) 245–250. https://doi.org/10.1016/j.foodchem.2013.11.123.

B. Mostafiz, S.A. Bigdeli, K. Banan, H. Afsharara, D. Hatamabadi, P. Mousavi, C.M. Hussain, R. Keçili, F. Ghorbani-Bidkorbeh, Molecularly imprinted polymer-carbon paste electrode (MIP-CPE)-based sensors for the sensitive detection of organic and inorganic environmental pollutants: A review, Trends in Environmental Analytical Chemistry 32 (2021) e00144. https://doi.org/10.1016/j.teac.2021.e00144.

Md.A. Rashed, M. Faisal, M. Alsaiari, S.A. Alsareii, F.A. Harraz, MWCNT-Doped Polypyrrole-Carbon Black Modified Glassy Carbon Electrode for Efficient Electrochemical Sensing of Nitrite Ions, Electrocatalysis 12 (2021) 650–666. https://doi.org/10.1007/s12678-021-00675-6.

S. Tajik, H. Beitollahi, F.G. Nejad, M. Safaei, K. Zhang, Q. Van Le, R.S. Varma, H.W. Jang, M. Shokouhimehr, Developments and applications of nanomaterial-based carbon paste electrodes, RSC Adv 10 (2020) 21561–21581. https://doi.org/10.1039/d0ra03672b.

J. Luo, A. Sam, B. Hu, C. DeBruler, X. Wei, W. Wang, T.L. Liu, Unraveling pH dependent cycling stability of ferricyanide/ferrocyanide in redox flow batteries, Nano Energy 42 (2017) 215–221. https://doi.org/10.1016/j.nanoen.2017.10.057.

I.H.I. Habib, Anodic Stripping Voltammetric Determination of Nitrite Using Carbon Paste Electrode Modified with Chitosan, Am J Analyt Chem 02 (2011) 284–288. https://doi.org/10.4236/ajac.2011.22035.

Y. Wang, E. Laborda, R.G. Compton, Electrochemical oxidation of nitrite: Kinetic, mechanistic and analytical study by square wave voltammetry, Journal of Electroanalytical Chemistry 670 (2012) 56–61. https://doi.org/10.1016/j.jelechem.2012.02.016.

Downloads

Published

27-12-2024

How to Cite

[1]
A. Cahyotomo, Mohammad Jihad Madiabu, Arie Pratama Putra, Ardina Purnama Tirta, Imas Solihat, and Dicky Annas, “Fabrication and Characterization of Syringe Carbon Paste Electrode for Electrochemical Measurement”, He: JSAC, vol. 4, no. 2, pp. 39–45, Dec. 2024.

Issue

Vol. 4 No. 2 (2024): Helium: Journal of Science and Applied Chemistry (In Progress)

Section

Articles

License

Copyright (c) 2024 Helium: Journal of Science and Applied Chemistry

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.